Testbook Logo
Exams SuperCoaching Test Series Skill Academy
More

Question

Download Solution PDF

The frequency of ripple in the output voltage of a three phase controlled bridge rectifier depends on

This question was previously asked in
ESE Electrical 2015 Paper 2: Official Paper
Attempt Online
View all UPSC IES Papers >
  1. firing angle
  2. load inductance
  3. load resistance
  4. supply frequency

Answer (Detailed Solution Below)

Option 4 : supply frequency
Free Tests
View all Free tests >
Free
ST 1: UPSC ESE (IES) Civil - Building Materials
6.2 K Users
20 Questions 40 Marks 24 Mins
Start Now

Detailed Solution

Download Solution PDF

The frequency of ripple in the output voltage of a three-phase controlled bridge rectifier depends on the supply frequency. The output frequency is

f0 = n fS

Where n is the number of pulses in the output of the converter and fs is the supply frequency

Note: Ripple factor depends on the firing angle, load inductance, and resistance.
Download Solution PDF
Latest UPSC IES Updates

Last updated on May 28, 2025

->  UPSC ESE admit card 2025 for the prelims exam has been released. 

-> The UPSC IES Prelims 2025 will be held on 8th June 2025.

-> The selection process includes a Prelims and a Mains Examination, followed by a Personality Test/Interview.

-> Candidates should attempt the UPSC IES mock tests to increase their efficiency. The UPSC IES previous year papers can be downloaded here.

More Effect of Source Impedance on Converters Questions

Q1.For the same load, if the phase sequence of a three-phase supply changes, then:
Q2.A single phase full converter delivers power to a resistive load R. For an AC source voltage of Vs, the average output voltage Vo is given by (where α is firing angle):
Q3.For the 3ϕ full converter having resistive load, the ripple frequency f ripple is __________. 
Q4.A half-wave, controlled rectifier with a purely resistive load has delay \(\alpha =\frac{\pi}{3}\), Calculate form factor.
Q5.A single phase full converter feeds power to RLE load with R = 8Ω, L = 8 mH and E = 46.42 V, the ac source voltage is 230 V, 50 Hz, for continuous conduction. Find the average value of load current for a firing angle delay of 45° 
Q6.The frequency of ripple in the output voltage of a three phase controlled bridge rectifier depends on
Q7.A single-phase, full-bridge, fully controlled thyristor rectifier feeds a load comprising a 10 Ω resistance in series with a very large inductance. The rectifier is fed from an ideal 230 V, 50 Hz sinusoidal source through cables which have negligible internal resistance and a total inductance of 2.28 mH. If the thyristors are triggered at an angle α = 45°, the commutation overlap angle in degree (rounded off to 2 decimal places) is _______

More Phase Controlled Rectifiers Questions

Q1.A fully controlled single-phase bridge rectifier is feeding a highly inductive load such that the load current is continuous. If the firing angle is set at 120°, then the average load voltage is ________ and the load current is ________.
Q2.For the same load, if the phase sequence of a three-phase supply changes, then:
Q3.If 'α' is the firing angle and 'β' is the extinction angle of a given SCR, then which of the following relations between them is true?
Q4.For the rectifier circuit shown in the figure, the expression for the average value of output voltage = __________, provided 'α' is the firing angle.
Q5.How can variable frequency converters be classified?
Q6.In both, semi-converter and full converter systems, as the output voltage decreases:
Q7.The source voltage for the circuit shown is 220 V and the load inductance is 220 μH. If the switch is closed for a time t1 = 100 μs, then the load current will be:
Q8.A single phase full converter delivers power to a resistive load R. For an AC source voltage of Vs, the average output voltage Vo is given by (where α is firing angle):
Q9.Compute the peak inverse voltage of thyristor connected in three-phase, six-pulse bridge rectifier having input voltage of 415 V. Consider the voltage safety factor to be 2.1.
Q10.The capability of a power supply to maintain constant voltage or current at the output despite change in supply's load is known as _______.
Suggested Test Series
View All >
UPSC ESE (IES) Civil Mock Test Series
116 Total Tests with 1 Free Tests
Start Free Test
UPSC ESE (IES) Prelims Paper 1 Mock Test Series
54 Total Tests with   1 Free Tests
Start Free Test
Suggested Exams
Exam-Logo
TANGEDCO Assistant Engineer
Exam-Logo
UPSC IES

TANGEDCO Assistant Engineer Important Links

More Power Electronics and Drives Questions

Q1.Which of the following is a characteristic of a group drive system?
Q2.Which control method enables four-quadrant operation of induction motors?
Q3.In a thyristor _________ is the time required for the forward blocking voltage to fall from 10% of an anode voltage to the on-state voltage drop of the device.
Q4.If the latching current of a thyristor is 4 mA and it is connected in series with a purely inductive load of 0.2 H across a DC voltage of 200 V. What should be the minimum width of the pulse to properly turn on the thyristor?
Q5.A fully controlled single-phase bridge rectifier is feeding a highly inductive load such that the load current is continuous. If the firing angle is set at 120°, then the average load voltage is ________ and the load current is ________.
Q6.The voltage applied to the gate terminal of a thyristor is a rectangular pulse of 12 V with a period of 50 us and a duty cycle of 0.2. What is the average power loss in the gate circuit, if the peak gate power loss is 5 W?
Q7.In which type of forced commutation method is the thyristor self-commutated by an LC circuit?
Q8.Which of the following devices can withstand bipolar voltages?
Q9.False turn-on of a thyristor by large \(\rm \frac{dv}{dt}\) can be prevented by using a _________ circuit in _________ with the device.
Q10.Which of the following is NOT valid as far as alternative names used for IGBT are concerned?
Important Exam
Super Coaching
Exams
Previous Year Papers
Test Series
Objective Questions
Testbook Edu Solutions Pvt. Ltd.
1st & 2nd Floor, Zion Building,
Plot No. 273, Sector 10, Kharghar,
Navi Mumbai - 410210
[email protected]
Toll Free:1800 833 0800
Office Hours: 10 AM to 7 PM (all 7 days)
Company
About usCareers We are hiringTeach Online on TestbookPartnersMediaSitemap
Products
Test SeriesTestbook PassOnline CoursesOnline VideosPracticeBlogRefer & EarnBooks
Our Apps
Follow us on
Copyright © 2014-2022 Testbook Edu Solutions Pvt. Ltd.: All rights reserved
User PolicyTermsPrivacy
Get Free Access Now
Hot Links： teen patti boss teen patti master teen patti lucky teen patti stars