English
Hindi

Question

Download Solution PDF

The magnitude of the velocity of any point on the kinematic link relative to the other point on the same kinematic link is the product of

This question was previously asked in
ESE Mechanical 2020 Official Paper
Attempt in App
View all UPSC IES Papers >
  1. A square root of an angular velocity of the link and the distance between the two points under consideration
  2. An angular velocity of the link and the square of distance between the two points under consideration
  3. A square of an angular velocity of the link and the distance between the two points under consideration
  4. An angular velocity of the link and the distance between the two points under consideration

Answer (Detailed Solution Below)

Option 4 : An angular velocity of the link and the distance between the two points under consideration
Free Tests
View all Free tests >
Free
ST 1: UPSC ESE (IES) Civil - Building Materials
20 Qs. 40 Marks 24 Mins
Start Now

Detailed Solution

Download Solution PDF

Concept:

The magnitude of the velocity of any point on the kinematic link relative to the other point on the same kinematic link is the product of angular velocity of the link and the distance between the two points under consideration.

VBA = ω × RBA

Download Solution PDF
Latest UPSC IES Updates

Last updated on Jun 23, 2025

-> UPSC ESE result 2025 has been released. Candidates can download the ESE prelims result PDF from here.

->  UPSC ESE admit card 2025 for the prelims exam has been released. 

-> The UPSC IES Prelims 2025 will be held on 8th June 2025.

-> The selection process includes a Prelims and a Mains Examination, followed by a Personality Test/Interview.

-> Candidates should attempt the UPSC IES mock tests to increase their efficiency. The UPSC IES previous year papers can be downloaded here.

Exams Tests Super Practice

More Velocity Analysis Questions

Q1.In a slider-crank mechanism, the velocity of piston becomes maximum when:
Q2.A and B are two points on the same link. The direction of the velocity of B relative to A is:
Q3.Two points of a metal rod are moving with velocities 3u and u perpendicular to the rod and in the same direction separated by a distance ‘r’. Angular velocity of the rod will be:
Q4.If the rotational speed of a crank of radius 50 cm is 100 RPM and the angular acceleration is 50 rad/s2, then the tangential acceleration of the crank will be:
Q5.Axode is also known as _________. 
Q6.The magnitude of the velocity of any point on the kinematic link relative to the other point on the same kinematic link is the product of
Q7.The direction of linear velocity of any point on the kinematic link relative to any other point on the same kinematic link is_____
Q8.In the 4-bar mechanism as shown, the link PQ measures 30 cm and rotates uniformly at 100 rpm. The velocity of point Q on link PQ is ______ (in m/s)
Q9.The velocity ratio of a single purchase crab winch can be increased by

More Velocity and Acceleration Analysis Questions

Q1.A car travelling at speed V can just take a turn around a bend of radius R without skidding sideways. Under identical road conditions, if this person wants to double the speed, the minimum turn radius he can make without skidding is
Q2.A point on a rigid flywheel of radius 750 mm undergoes a uniform linear acceleration of 3 m/s2. The flywheel’s angular acceleration is
Q3.The number of instantaneous centres with 5 links is: 
Q4.In a slider-crank mechanism, the velocity of piston becomes maximum when:
Q5.The magnitude of coriolis component of acceleration is (Where v = velocity, ? = angular velocity)
Q6.In dynamic analysis of planar Mechanisms, the equivalent offset inertia force may be kept at a distance (h) of
Q7.Centripetal force is responsible to
Q8.When the crank is at the inner dead centre in a reciprocating steam engine, the velocity of the piston will be ______.
Q9.In a slider crank mechanism, radius of crank is 480 mm, it's angular velocity is 20 rad/s. Velocity of crank will be equal to
Q10.Component of acceleration parallel to that link is called as
Suggested Test Series
View All >
UPSC ESE (IES) Civil Mock Test Series
116 Total Tests with 1 Free Tests
Start Free Test
UPSC ESE (IES) Prelims Paper 1 Mock Test Series
54 Total Tests with   1 Free Tests
Start Free Test

UPSC IES Important Links

ResultHall TicketEligibilitySalary and Job ProfileExam PatternECE Syllabus

More Theory of Machines Questions

Q1.In rack and pinion gear, the rack is a _____ and the pinion is a _____.
Q2.A quick return motion mechanism used in shaper machine
Q3.In a Hartnell governor, if a spring of greater stiffness is used, then the governor will be:
Q4.Isochronism in a governor is desirable when _____.
Q5.In the porter governor, the main constituent of controlling force is: 
Q6.A Pair is known as kinematic pair if the relative motion between links of pair is :
Q7.When two elements of a pair are in line contact, then pair is known as:
Q8.A flywheel is used :
Q9.What is the clearance of gears?
Q10.What is Module of a gear?
Testbook Edu Solutions Pvt. Ltd.
1st & 2nd Floor, Zion Building,
Plot No. 273, Sector 10, Kharghar,
Navi Mumbai - 410210
support@testbook.com
Toll Free:1800 833 0800
Office Hours: 10 AM to 7 PM (all 7 days)
Company
About usCareers We are hiringTeach Online on TestbookPartnersMediaSitemap
Products
Test SeriesTestbook PassOnline CoursesOnline VideosPracticeBlogRefer & EarnBooks
Copyright © 2014-2022 Testbook Edu Solutions Pvt. Ltd.: All rights reserved
User PolicyTermsPrivacy
Hot Links： teen patti master game teen patti apk teen patti bindaas teen patti mastar dhani teen patti